Transmission Control Module ECU Reset-Recovery Occurred
Table of contents
P1DB3 JEEP Possible Causes
- Faulty Transmission Control Module (TCM)
- Transmission Control Module (TCM) harness is open or shorted
- Transmission Control Module (TCM) circuit poor electrical connection
How do I fix code P1DB3 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1DB3 JEEP code
The cost of diagnosing the P1DB3 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1DB3 JEEP Description
The purpose of the diagnostic is to determine the reason of a reset after the reset occurred. Some of these are initiated by the Transmission Control Module (TCM) software and others may be caused by an under voltage condition. If the TCM detects a condition for initiating a reset, the reason of the reset is stored in an area of Random Access Memory (RAM) that is not initialized during TCM startup. Upon TCM startup this information is read out to store an appropriate Diagnostic Trouble Code (DTC) indicating the reason of the reset.