Hybrid Powertrain Control Module 2 Requested MIL Illumination
Table of contents
P1E00 CHEVROLET Possible Causes
- Faulty Hybrid Powertrain Control Module
- Hybrid Powertrain Control Module harness is open or shorted
- Hybrid Powertrain Control Module circuit poor electrical connection
How do I fix code P1E00 CHEVROLET?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1E00 CHEVROLET code
The cost of diagnosing the P1E00 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1E00 CHEVROLET Description
This Diagnostic Trouble Code (DTC) indicates that an emission related DTC has set in the hybrid powertrain control module 2. The hybrid powertrain control module 2 sends a message, via the serial data circuit, to the Engine Control Module (ECM) requesting illumination of the Malfunction Indicator Lamp (MIL). When the ECM receives the message, DTC P1E00 will set in the ECM.