Hybrid Battery Contactor Status Circuit Low Voltage
Table of contents
P1E08 CHEVROLET Possible Causes
- Faulty Power Inverter Module
- Power Inverter Module harness is open or shorted
- Power Inverter Module circuit poor electrical connection
How do I fix code P1E08 CHEVROLET?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1E08 CHEVROLET code
The cost of diagnosing the P1E08 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1E08 CHEVROLET Description
The hybrid powertrain control module monitors the hybrid/EV battery high voltage contactor status and requests contactor function primarily via serial data. In the event of a serial data fault there is a redundant discreet circuit between the two controllers that transmits the hybrid powertrain control module contactor requests to the hybrid powertrain control module 2 via a pulse width modulated (PWM) signal. The hybrid powertrain control module is internal to the power inverter module, often referred to as the drive motor generator power inverter module, and is not serviced separately.