Temperature Door Position Signal Short To Battery
Table of contents
P1E11 JEEP Possible Causes
- Faulty Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator
- Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator harness is open or shorted
- Heating, Ventilation, and Air Conditioning (HVAC) Door Actuator circuit poor electrical connection
- Faulty Heating, Ventilation, and Air Conditioning (HVAC) Controller
How do I fix code P1E11 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1E11 JEEP code
The cost of diagnosing the P1E11 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1E11 JEEP Description
The Powertrain Control Module receives a CAN BUS message from the Heating, Ventilation, and Air Conditioning (HVAC) module that a Temperature Door Actuator position signal circuit is shorted to battery voltage.