Auxiliary Transmission Fluid Pump Control Module Calculated Motor Position Performance
Table of contents
P1E29 Possible Causes
- Program Power Inverter Module
- Faulty Power Inverter Module
- Power Inverter Module harness is open or shorted
- Power Inverter Module circuit poor electrical connection
How do I fix code P1E29?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1E29 code
The cost of diagnosing the P1E29 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1E29 Description
The power inverter module, often referred to as the drive motor generator power inverter module, contains three motor control modules and the hybrid powertrain control module. Two of the motor control modules operate their respective drive motor generator based upon power inverter module commands. The third motor control module controls the auxiliary transmission fluid pump motor. The hybrid powertrain control module and the motor control modules share the power inverter module ignition voltage circuit, battery voltage circuits and chassis earth. The motor control modules and the hybrid powertrain control module are part of the power inverter module and are not serviced separately.
The auxiliary transmission fluid pump motor control module uses sensorless control to estimate motor speed and position from the phase current sensors.