Hybrid/EV Battery Interface Control Module 2 5 V Reference Circuit
Table of contents
P1E99 CADILLAC Possible Causes
- Faulty Hybrid/EV Battery Interface Control Module
- Hybrid/EV Battery Interface Control Module harness is open or shorted
- Hybrid/EV Battery Interface Control Module circuit poor electrical connection
How do I fix code P1E99 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1E99 CADILLAC code
The cost of diagnosing the P1E99 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1E99 CADILLAC Description
The drive motor battery contains 288 cells. Groups of three cells are welded together in parallel. There are a total of 96 cell groups in the drive motor battery assembly. These cell groups are electrically connected in-series. Each inpidual cell group is rated at 3.7 volts, for a nominal system voltage of 355 volts direct current. The battery cells are also grouped together into three sections. The first 90 cells/30 cell groups make up battery section one. This section is adjacent to the cowl and contains batteries 67 through to 96. Battery section two is located behind section one. It is made up of 72 cells/24 cell groups and contains batteries 43 through to 66. The transverse battery section is section number three, it is made up of the remaining 126 cells/42 cell groups and contains batteries 1 through to 42. The three battery sections are inpidually serviceable components.
The battery energy control module monitors the voltage of the 96 cell groups. Voltage sense lines are attached to each inpidual cell group, and these sense lines terminate at a connector located on the top surface of the battery section. A serviceable voltage sense harness joins this connector to a drive motor battery high-voltage interface control module, also located on the top surface of the battery section. The drive motor battery high-voltage interface control module encodes the voltage reading and transmits it to the battery energy control module through the battery control harness. There is one drive motor battery high-voltage interface control module located on battery sections one and two, and two drive motor battery high-voltage interface control modules associated with battery section three. The drive motor battery high-voltage interface control module, voltage sense harnesses, battery control harness and battery energy control module are all considered serviceable components.
The battery energy control module will determine when a fault condition is present. Diagnostics and system status are communicated from the battery energy control module to hybrid/EV powertrain control module 2 through serial data. The hybrid/EV powertrain control module 2 is the host controller for diagnostic trouble code information.