Battery Charger Control Module Ignition On/Start Switch Circuit Low Voltage
Table of contents
P1EF6 CADILLAC Possible Causes
- Faulty Hybrid Powertrain Control Module 2
- Hybrid Powertrain Control Module 2 harness is open or shorted
- Hybrid Powertrain Control Module 2 circuit poor electrical connection
How do I fix code P1EF6 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1EF6 CADILLAC code
The cost of diagnosing the P1EF6 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1EF6 CADILLAC Description
The Body Control Module (BCM) controls the ignition run relay through the control circuit by applying voltage to the circuit. The ignition circuit is energized when the vehicle power mode is Vehicle ON or Vehicle in Service Mode. The hybrid powertrain control module 2 sends the vehicle power mode status in a serial data message to the battery charger control module, A/C compressor, battery energy control module, fuel pump control module and the Transmission Control Module (TCM).