Hybrid/EV Battery Pack Coolant Level Sensor Circuit High Voltage
Table of contents
P1FFD CADILLAC Possible Causes
- Faulty Hybrid/EV Powertrain Control Module 2
- Hybrid/EV Powertrain Control Module 2 harness is open or shorted
- Hybrid/EV Powertrain Control Module 2 circuit poor electrical connection
How do I fix code P1FFD CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P1FFD CADILLAC code
The cost of diagnosing the P1FFD CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1FFD CADILLAC Description
The hybrid/EV battery pack coolant system has a level sensor. The hybrid/EV battery pack coolant level sensor is attached to the coolant surge tank. The level sensor is a 2 state bi-metallic reed switch which changes state when the switch reed is exposed to magnetism. The level of the hybrid/EV battery pack coolant in the surge tank causes a magnet-equipped float to move towards and away from the sensor as coolant level decreases or increases. The hybrid/EV powertrain control module 2 supplies 5 V to the signal circuit and a ground for the low reference circuit. The hybrid/EV battery pack coolant level sensor resistance decreases when the battery coolant level in the surge tank gets low. The hybrid/EV powertrain control module 2 uses the hybrid/EV battery pack coolant level sensor to determine if the hybrid/EV battery pack coolant system is low on coolant.