Intake Manifold Runner Control Circuit/Open Bank 1
Table of contents
P2008 TOYOTA Possible Causes
- Faulty VSV for swirl control valve
- VSV for swirl control valve harness is open or shorted
- VSV for swirl control valve circuit poor electrical connection
- Faulty Intake manifold (swirl control valve)
- Faulty EGR valve assy
- Faulty MAF meter
- Faulty Engine Control Module (ECM)
- WIRI
How do I fix code P2008 TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2008 TOYOTA code
The cost of diagnosing the P2008 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2008 TOYOTA Description
The swirl control valve is mounted on the intake manifold. The Vacuum Switching Valve (VSV) for swirl control valve changes the vacuum to actuate the actuator.
The Engine Control Module (ECM) determines the opening angle of the swirl control valve, and uses the VSV for swirl control valve to change the vacuum applied to the actuator’s diaphragm to open and close the swirl control valve.