Intake Manifold Runner Position Sensor/Switch Circuit Bank 1
Table of contents
P2014 TOYOTA Possible Causes
- Intake Manifold Runner Valve Binding Or Sticking
- Intake Manifold Runner Valve
- Vacuum Line Cracked or Broken (Vacuum Leak)
- Intake Manifold Runner Position Sensor 1 or Wiring
- Faulty Engine Control Module (ECM)
How do I fix code P2014 TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2014 TOYOTA code
The cost of diagnosing the P2014 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2014 TOYOTA Description
The Intake Manifold Runner Valve (IMRV) system is mounted on the intake manifold and consists of the intake manifold runner valve (IMRV), the IMRV motor and the IMRV position sensor. The IMRV motor opens and closes the IMRV using multiple gears. The valve position sensor detects the opening angle of the IMRV.
The IMRV has a groove on its upper portion.
When the IMRV is closed, air flows through a groove into the cylinder from the intake manifold, so that a dynamic air flow or ”tumble” air flow is generated in the cylinder. The tumble air flow drastically reduces fuel deposits inside the intake air port and the combustion wall surface inside the cylinder. This improves the combustion efficiency by boosting the air−fuel mixture and air flow turbulence.