Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1
Table of contents
P2016 JEEP Possible Causes
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern bind, seize, damage, or obstruction of IMRC hardware
How do I fix code P2016 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2016 JEEP code
The cost of diagnosing the P2016 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2016 JEEP Description
The engine is equipped with an intake manifold flow control valve to promote maximum air/fuel atomization. The valve restricts air flow, causing it to tumble or swirl. The tumbling action helps ensure that the fuel and air mix thoroughly and burn faster. The intake manifold flow control valve and variable valve timing work together to improve fuel economy, idle stability, and emissions. The Engine Control Module (ECM) monitors the Intake Manifold Runner Position Sensor/Switch. The ECM sets the OBDII code when the Intake Manifold Runner Position Sensor/Switch is not to factory specifications.