Intake Manifold Runner Position Sensor/Switch Circuit Bank 2
Table of contents
P2019 MERCURY Possible Causes
- Intake manifold runner control monitor circuit open
- Mechanical concern bind, seize, damage or obstruction of IMRC hardware
How do I fix code P2019 MERCURY?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2019 MERCURY code
The cost of diagnosing the P2019 MERCURY code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2019 MERCURY Description
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Each code distinguishes the corresponding bank for IMRC actuator assemblies with dual monitor switches. The test fails when the signal on the monitor pin is outside an expected calibrated range.