Reducing Agent Active Tank Level Sensor Signal
Table of contents
P203A BMW Possible Causes
- Faulty Reducing Agent Active Tank Level Sensor
- Reducing Agent Active Tank Level Sensor harness is open or shorted
- Reducing Agent Active Tank Level Sensor circuit poor electrical connection
How do I fix code P203A BMW?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P203A BMW code
The cost of diagnosing the P203A BMW code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P203A BMW Description
The evaluation electronics for the fuel level sensor transmit the information “all sensors wet” immediately, followed by “all sensors dry” within a period of 70s. If the change in condition does not occur within this time period, the fault is set. Furthermore, the fault is set when the fluid level non-linearised value is not between