Intake Manifold Tuning Valve Position Sensor Circuit High Voltage


Table of contents

P2078 CADILLAC Possible Causes

  • Faulty Intake Manifold Tuning Valve
  • Intake Manifold Tuning Valve harness is open or shorted
  • Intake Manifold Tuning Valve circuit poor electrical connection

How do I fix code P2078 CADILLAC?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the P2078 CADILLAC code

  The cost of diagnosing the P2078 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P2078 CADILLAC Description

  An Intake Manifold Tuning (IMT) Valve is used to change the intake manifold plenum configuration. When the IMT valve is open, the intake manifold is configured to one large plenum. When the IMT valve is closed, the intake manifold is configured to 2 smaller plenums. The IMT valve improves engine performance at low and high engine speeds depending on the engine load. The Diagnostic Trouble Code (DTC) will set when the control module detects that the state of the driver and the state of the circuit do not match. The control module will detect an open, short to ground on the variable tuning valve signal or an open or a short to ground on the ignition voltage circuit of the IMT valve solenoid for more than 6.25 seconds.

Leave a Reply

Your email address will not be published. Required fields are marked *