Electronic Throttle Control System Malfunction
Table of contents
P2101 HONDA Possible Causes
- Faulty Throttle Actuator Control Actuator
- Throttle Actuator Control Actuator harness is open or shorted
- Throttle Actuator Control Actuator circuit poor electrical connection
How do I fix code P2101 HONDA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2101 HONDA code
The cost of diagnosing the P2101 HONDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2101 HONDA Description
The Electronic Throttle Control System (ETCS) controls the throttle valve opening. The system is composed of the throttle actuator, the throttle valve, Throttle Position (TP) sensors A and B, the throttle actuator control module, the throttle actuator control module relay, the Accelerator Pedal Position (APP) sensor, and the Powertrain Control Module (PCM). The Accelerator Pedal Position (APP) sensor is operated via the throttle cable to determine the accelerator opening value when the driver presses the accelerator pedal. The accelerator pedal opening value is converted to a signal in the APP sensor and transmitted to the PCM to compute the target position. The target position signal is then transmitted to the throttle actuator control module. The throttle actuator control module determines the throttle valve target position according to the signal received and operates the throttle actuator to move the throttle valve to the target position. The actual throttle valve position is determined by TP sensor A installed in the throttle body. The throttle actuator control module compares the throttle valve target opening angle and the actual throttle valve opening angle from TP sensor A, and when the difference exceeds the specification, the throttle actuator control module transmits the malfunction data to the PCM. When the PCM receives the malfunction data from the throttle actuator control module, the PCM detects the malfunction of the throttle actuator system and a DTC is stored.