Throttle Actuator Control System Forced Limited Engine Speed
Table of contents
P2110 SUZUKI Possible Causes
- Faulty Throttle Actuator Control (TAC) Motor
- Throttle Actuator Control (TAC) Motor harness is open or shorted
- Throttle Actuator Control (TAC) Motor circuit poor electrical connection
How do I fix code P2110 SUZUKI?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2110 SUZUKI code
The cost of diagnosing the P2110 SUZUKI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2110 SUZUKI Description
The Engine Control Module (ECM) controls the throttle valve by applying a varying voltage to the control circuits of the Throttle Actuator Control (TAC) motor. The ECM monitors the duty cycle that is required to actuate the throttle valve. The ECM monitors the Throttle Position (TP) sensors 1 and 2 to determine the actual throttle valve position. The Diagnostic Trouble Code (DTC) will set when the ECM detects the system is in Power Management Mode.