Vehicle Speed Sensor ‘A’/’B’ Correlation
Table of contents
P2162 NISSAN Possible Causes
- Faulty Rear LH wheel sensor
- Faulty Rear RH wheel sensor
- Faulty ABS actuator and electric unit (control unit)
- Rear RH/LH wheel sensor harness is open or shorted
- Rear RH/LH wheel sensor circuit poor electrical connection
How do I fix code P2162 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2162 NISSAN code
The cost of diagnosing the P2162 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The Engine Control Module (ECM) detects a rear LH wheel sensor signal or a rear RH wheel sensor signal transmitted from the ABS actuator and electric unit (control unit) via Control Area Network (CAN) communication at least for 5 seconds in a row when the vehicle is in stopped condition.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2162 NISSAN Description
The Engine Control Module (ECM) receives a rear wheel sensor signal from ABS actuator and electric unit (control unit) via Control Area Network (CAN) communication to switch combustion for the direct injection gasoline system. For the direct injection gasoline system.