Throttle/Pedal Position Sensor ‘A’ Maximum Stop Performance
Table of contents
P2163 FORD Possible Causes
- Faulty Electronic Throttle Control (ETC)
- Electronic Throttle Control (ETC) harness is open or shorted
- Electronic Throttle Control (ETC) Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How do I fix code P2163 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2163 FORD code
The cost of diagnosing the P2163 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- No throttle pedal response
P2163 FORD Description
The Powertrain Control Module (PCM) monitors the electronic throttle for the ability of the throttle plate to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. The P2163 code sets if the throttle plate does not reach the upper mechanical stop position within a calibrated amount of time.