Engine Coolant Temperature Sensor 2 Circuit High Voltage
Table of contents
P2185 HONDA Possible Causes
- Low coolant level
- Faulty Engine Coolant Temperature Sensor
- Stuck or leaking thermostat
- Engine Coolant Temperature Sensor harness is open or shorted
- Engine Coolant Temperature Sensor circuit poor electrical connection
How do I fix code P2185 HONDA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
User Submitted Video
Cost of diagnosing the P2185 HONDA code
The cost of diagnosing the P2185 HONDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2185 HONDA Description
Engine Coolant Temperature (ECT) sensor 2 is a thermistor attached to the radiator. The Powertrain Control Module (PCM) applies voltage (about 5 V) to the ECT2 signal circuit through a pull up resistor. As the engine coolant temperature cools, ECT sensor 2 resistance increases, and the PCM detects a high signal voltage. As the engine coolant warms, the sensor resistance decreases, and the PCM detects a low ECT2 signal voltage. If the ECT sensor 2 output voltage is less than a set value when the engine coolant temperature is high, the PCM detects a malfunction and a DTC is stored.