Turbocharger/Supercharger Boost System Performance
Table of contents
P2263 DODGE Possible Causes
- Engine Control Module (ECM) calibration update
- Soot build up on turbocharger
- Faulty turbocharger
How do I fix code P2263 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2263 DODGE code
The cost of diagnosing the P2263 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2263 DODGE Description
The Variable Geometry Turbocharger (VGT) is electronically activated by the Electronic Turbo Actuator. The Electronic Turbo Actuator is a smart device and receives information via the CAN BUS from the Engine Control Module (ECM). The Electronic Turbo Actuator performs its own diagnostics and reports failures back to the ECM using the CAN BUS. The ECM then decodes the error message and converts it to a fault code. The ECM turns on the MIL lamp after the diagnostic runs and fails in two consecutive drive cycles. The ECM will turn off the MIL lamp after this diagnostic runs and passes in four consecutive drive cycles.