Turbocharger Boost Control Position Sensor ‘A’ Circuit Range/Performance
Table of contents
P2563 DODGE Possible Causes
- Faulty Turbocharger due to foreign object damage.
How do I fix code P2563 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- From Users Comments: Code P2563 for a 2008 Dodge diesel can be corrected by enabling the exhaust brake for a few trips. When the exhaust brake performance improves the Check Engine light should extinguish. If not then Dodge will need to clean out the turbocharger.
Cost of diagnosing the P2563 DODGE code
The cost of diagnosing the P2563 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2563 DODGE Description
The variable Geometry Turbocharger (VGT) is electronically activated by the Electronic Turbo Actuator. The Electronic Turbo Actuator is a smart device that receives information via the CAN BUS from the Engine Control Module (ECM). The Electronic Turbo Actuator perform his own diagnostic and reports failures to the ECM using the CAN BUS. The ECM then decodes the errors message and convert it to a fault code.