Intake Air Heater ‘A’ Circuit Range/Performance
Table of contents
P2604 FORD Possible Causes
- Faulty Intake Air Heater (IAH) Relay
- Faulty Intake Air Heater
- Intake Air Heater Relay harness is open or shorted
- Intake Air Heater Relay circuit poor electrical connection
- Intake Air Heater harness is open or shorted
- Intake Air Heater circuit poor electrical connection
How do I fix code P2604 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2604 FORD code
The cost of diagnosing the P2604 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2604 FORD Description
The Engine Control Module (ECM) uses an Intake Air Heater (IAH) to warm the incoming air for proper cylinder combustion. The ECM grounds the control coil of the IAH relay to energize the heater during cold operation. The control module will command the IAH ON when the engine coolant temperature is below 40 C (104 F). The power to the IAH heater is supplied by the battery positive voltage circuit through the IAH relay.