PCM Internal Engine Off Timer Performance
Table of contents
P2610 JEEP Possible Causes
- Faulty Powertrain Control Module (PCM)
- PCM Harness is open or shorted
- PCM Circuit poor electrical connection
- PCM outdated program
How do I fix code P2610 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2610 JEEP code
The cost of diagnosing the P2610 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2610 JEEP Description
The Powertrain Control Module (PCM) contains a timer and measures time between an ignition switch OFF and the next ignition switch ON. This enables the judging of the state of engine cooling at an engine start. A rationality error has been detected for the PCM internal engine off timer performance test. An internal PCM failure is detected and the Diagnostic Trouble Code (DTC) will set.