Intake Rocker Arm Solenoid Valve 1 Stuck On
Table of contents
P2647 CADILLAC Possible Causes
- Faulty Intake Rocker Arm Solenoid Valve 1
- Intake Rocker Arm Solenoid Valve 1 harness is open or shorted
- Intake Rocker Arm Solenoid Valve 1 circuit poor electrical connection
How do I fix code P2647 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2647 CADILLAC code
The cost of diagnosing the P2647 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2647 CADILLAC Description
The rocker arm actuator system enables the Engine Control Module (ECM) to change the camshaft lift and duration while the engine is operating. The camshaft has 3 lobes for each intake valve. The inner lobe is for low lift and the 2 outer lobes are for high lift. The rocker arm solenoid valve controls the 2-step lift by controlling the oil flow to the rocker arm. In default mode, a locking pin locks the inner and outer mechanisms of the rocker arm together to provide high lift. When low lift is commanded, oil pressure retracts a locking pin within the rocker arm.
The rocker arm solenoid valve receives a signal from the ECM. The ECM controls the rocker arm solenoid valve by supplying a 12 V PWM signal. The ECM supplies a ground to the low reference circuit.