Cylinder 8 Injector Data Incompatible
Table of contents
P2693 CHEVROLET Possible Causes
- Program Injector
How do I fix code P2693 CHEVROLET?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Programming Injector must perform with an OBDII scanner capable of programming injectors.
Cost of diagnosing the P2693 CHEVROLET code
The cost of diagnosing the P2693 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2693 CHEVROLET Description
The control functions for the fuel injection system are integrated into the Engine Control Module (ECM). Each injector’s flow rate information and cylinder position are stored in the memory of both the Glow Plug Control Module (GPCM) and the ECM. The fuel injector flow rate programming must be done when any of the following procedures are performed: The ECM is replaced, the GPCM is replaced, or any fuel injectors are replaced.
If the ECM does not communicate, the flow rate information can be retrieved from the GPCM. If both control modules fail to communicate, the fuel injector flow rate information, or Injection Quantity Adjustment (IQA) flow rate numbers, will need to be retrieved from each injector.