Transmission Friction Element ‘E’ Apply Time Range/Performance
Table of contents
P2704 FORD Possible Causes
- Faulty Reverse Clutch Solenoid
- Reverse Clutch Solenoid harness is open or shorted
- Reverse Clutch Solenoid circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How do I fix code P2704 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2704 FORD code
The cost of diagnosing the P2704 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2704 FORD Description
The intermediate (SSPC-C), low/reverse (SSPC-E) and overdrive (SSPC-B) clutches are each controlled by a directly proportional Variable Force Shift (VFS) Solenoid. The coast (SSPC-A) and the direct clutch (SSPC-D) are each controlled by an inversely proportional VFS. All shift pressure solenoids are electronically controlled by the Powertrain Control Module (PCM) which varies the current from 0 to 1 amp (directly proportional) or 1 to 0 amp (indirectly proportional).
The PCM monitors the Low Reverse Clutch. The Diagnostic Trouble Code (DTC) will set when the PCM has detected a failure within the low reverse clutch system.