Clutch Pressure Control Solenoid 5 Stuck Off
Table of contents
P2723 CADILLAC Possible Causes
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness is open or shorted
- Control Solenoid Valve Assembly circuit poor electrical connection
How do I fix code P2723 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2723 CADILLAC code
The cost of diagnosing the P2723 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2723 CADILLAC Description
The Clutch Pressure Control (PC) Solenoid 5 is integral to the control solenoid (w/body and Transmission Control Module (TCM)) valve assembly and has no serviceable parts. The PC solenoid 5 is a normally high-pressure control solenoid that provides fluid pressure to the 1-2-3-4 clutch regulator valve. The TCM controls the solenoid pressure by regulating the exhaust fluid. When the TCM commands the solenoid off, the exhausting fluid is stopped and the 1-2-3-4 pressure is high. When commanded on, the clutch PC solenoid 5 regulates the amount of exhausting transmission fluid. Solenoid power is supplied by the TCM through a High Side Driver (HSD). The HSD protects the circuits and components that the TCM powers. Should the circuit overload the driver will shutdown. After the overload is removed the HSD reset.