Input Speed Sensor 2 Circuit No Signal
Table of contents
P2767 JEEP Possible Causes
- Faulty Input Speed Sensor
- Input Speed Sensor harness is open or shorted
- Input Speed Sensor circuit poor electrical connection
How do I fix code P2767 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2767 JEEP code
The cost of diagnosing the P2767 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected
The Transmission Control Module (TCM) has detected a correlation error between the two Input Speed Sensor signals.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2767 JEEP Description
The Input Speed Sensor 2 is one of the two hall effect speed sensors that are used by the Transmission Control Module (TCM) to calculate the transmissions turbine speed. Since the turbine speed could not be measured directly, two of the drive elements are measured. Two input speed sensors are required because both elements are not active in all gears.