Torque Converter Temperature Too High
Table of contents
P2783 JEEP Possible Causes
- Internal transmission problem
- Faulty torque converter clutch
How do I fix code P2783 JEEP?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2783 JEEP code
The cost of diagnosing the P2783 JEEP code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2783 JEEP Description
The Transmission Control Module (TCM) monitors the friction loss of the torque converter clutch while it is in slipping mode. The TCM calculates friction loss using CAN communication signals such as, engine speed and engine torque, as well as the torque converter turbine speed computed by the TCM. Depending on the friction loss calculated in each program cycle, a corresponding value is added to a factor as long as the torque converter clutch is in slipping mode. The factor is set to 0 when the clutch is opened. If the factor reaches a specified value a DTC is set.