Pressure Control Solenoid ‘G’ Electrical
Table of contents
P2810 TOYOTA Possible Causes
- Faulty Pressure Control Solenoid ‘G’
- Pressure Control Solenoid ‘G’ harness is open or shorted
- Pressure Control Solenoid ‘G’ circuit poor electrical connection
- Blockage in Transmission Valve Body
How do I fix code P2810 TOYOTA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the P2810 TOYOTA code
The cost of diagnosing the P2810 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P2810 TOYOTA Description
The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position (1st, 2nd, 3rd, 4th. 5th or 6th gear). Then the TCM compares the actual gear with the shift schedule in the TCM memory to detect shift solenoid valves and valve body mechanical problems.