Invalid Data Received From Evaporative Emission System Leak Detection Control Module
Table of contents
U05A0 FORD Possible Causes
- Faulty Evaporative Emission System Leak Detection Control Module
- Evaporative Emission System Leak Detection Control Module harness is open or shorted
- Evaporative Emission System Leak Detection Control Module circuit poor electrical connection
How do I fix code U05A0 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Check for other Powertrain Control Module (PCM) codes or PCM related symptoms. Diagnose all other PCM codes or PCM related symptoms first.
Cost of diagnosing the U05A0 FORD code
The cost of diagnosing the U05A0 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U05A0 FORD Description
The Diagnostic Trouble Code (DTC) will set when a network concerns occur during module-to-module communication.
– Invalid data network concerns are set when data is transferred within the normal inter-module message but contains known invalid data. The transmitting module logs a DTC related to the invalid data concern.
– Missing message network concerns are set when missing message concerns are logged by the module upon failure to receive a message from another module within a defined retry period.