Lost Communication With VVEL Control Module
Table of contents
U1003 NISSAN Possible Causes
- Faulty Variable Valve Event & Lift (VVEL) Control Module
- VVEL Control Module harness is open or shorted
- VVEL Control Module circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How do I fix code U1003 NISSAN?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U1003 NISSAN code
The cost of diagnosing the U1003 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U1003 NISSAN Description
The Controller Area Network (CAN) is a serial communication line for real-time applications. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Engine Control Module (ECM) and Variable Valve Event & Lift (VVEL) control module are connected with two communication lines (CAN H line and CAN L line) and transmit/receive data. ECM shares information and links with the VVEL control module during operation.
The Diagnostic Trouble Code (DTC) sets when a CAN communication signal other than OBD (emission-related diagnosis) is not received between Variable Valve Event & Lift (VVEL) control module and Engine Control Module (ECM) for 2 seconds or more.