Lost communication With Battery Monitoring Sensor ‘A’
Table of contents
U1007 FORD Possible Causes
- Faulty Battery Monitoring Sensor ‘A’
- Battery Monitoring Sensor ‘A’ harness is open or shorted
- Battery Monitoring Sensor ‘A’ circuit poor electrical connection
How do I fix code U1007 FORD?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U1007 FORD code
The cost of diagnosing the U1007 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U1007 FORD Description
Modules connected to the class 2 serial data circuit monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. When a module receives a message for a critical operating parameter, the module records the identification number of the module which sent the message for State of Health monitoring. A critical operating parameter is one which, when not received, requires that the module use a default value for that parameter. When a module does not associate an identification number with at least one critical parameter within 5 seconds of beginning serial data communication, the Diagnostic Trouble Code (DTC) is set. When more than one critical parameter does not have an identification number associated with it, the DTC will only be reported once.