Lost Communication With Intelligent Battery Sensor
Table of contents
U113E DODGE Possible Causes
- Faulty Intelligent Battery Sensor (IBS)
- Intelligent Battery Sensor harness is open or shorted
- Intelligent Battery Sensor circuit poor electrical connection
How do I fix code U113E DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U113E DODGE code
The cost of diagnosing the U113E DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U113E DODGE Description
The Intelligent Battery Sensor (IBS) is mounted in-line with the negative Battery Cable. The IBS monitors the Battery state of charge and current draw. The IBS also has a built-in thermistor that calculates the Battery temperature. This information is reported through a Local Interconnect Network (LIN) BUS circuit to the Body Control Module (BCM). The BCM broadcasts the information to the Powertrain Control Module (PCM) over the Controller Area Network (CAN) BUS. The Diagnostic Trouble Code (DTC) sets when the BCM does not receive LIN Bus messages from the Intelligent Battery Sensor (IBS) for greater than 180 milliseconds.