Lost Communication With Right Side Satellite Impact Sensor 4
Table of contents
U11B0 DODGE Possible Causes
- Faulty Right Side Satellite Impact Sensor 4
- Right Side Satellite Impact Sensor 4 harness is open or shorted
- Right Side Satellite Impact Sensor 4 circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How do I fix code U11B0 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U11B0 DODGE code
The cost of diagnosing the U11B0 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U11B0 DODGE Description
The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicate this status back to the ORC with periodic updates. The repair of this fault condition involves verifying the integrity of the wiring between the ORC and the sensor. This code will set, if the ORC and the Right Side Impact Sensor 4 do not establish and maintain valid data communications. The Diagnostic Trouble Code (DTC) will become Active after the fault has set for 2 to 3 seconds. The DTC will go to Stored after the ORC to Right Side Impact Sensor 4 communication has recovered for 2.5 seconds.