Lost Brake Switch Message
Table of contents
U11BC DODGE Possible Causes
- Faulty Brake Pedal Position (BPP) Sensor
- Brake Pedal Position Sensor harness is open or shorted
- Brake Pedal Position Sensor circuit poor electrical connection
- Faulty Anti-Lock Brake System (ABS) Module
- Faulty Powertrain Control Module (PCM)
How do I fix code U11BC DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U11BC DODGE code
The cost of diagnosing the U11BC DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U11BC DODGE Description
The Powertrain Control Module (PCM) receives the brake switch signal over the Controller Area Network (CAN) C bus from the Anti-Lock Brake System (ABS) Module. The Diagnostic Trouble Code (DTC) sets when the PCM doesn’t receive a brake switch signal from the ABS Module over the CAN C bus. One Trip fault.