Lost Ignition Key Status Message
Table of contents
U11D0 CHRYSLER Possible Causes
- Faulty Powertrain Control Module (PCM)
- Faulty Body Control Module (BCM)
How do I fix code U11D0 CHRYSLER?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U11D0 CHRYSLER code
The cost of diagnosing the U11D0 CHRYSLER code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U11D0 CHRYSLER Description
This diagnostic checks for the availability of the Ignition Key Status signal which is sent by the Body Controller Module (BCM) via a Controller Area Network (CAN) message. The Ignition Key Status possible values include the following: 0) Lock, 1) Off, 2) Accessory, 3) Off and Accessory, 4) Run, 5) Start, and 7) Signal Not Available (SNA). The diagnostic checks the signal availability by checking if the received value is not equal to the SNA default value. When the signal is not available, the BCM sends an SNA default value to the Transmission Control Module (TCM). If the TCM reads this value then the Diagnostic Trouble Code (DTC) U11D0 is set.