Lost Communication With Right Impact Pressure Sensor
Table of contents
U11F1 DODGE Possible Causes
- Faulty Right Impact Pressure Sensor
- Right Impact Pressure Sensor harness is open or shorted
- Right Impact Pressure Sensor circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How do I fix code U11F1 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U11F1 DODGE code
The cost of diagnosing the U11F1 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
U11F1 DODGE Description
The impact sensors perform their own self-test using power supplied by the Occupant Restraint Controller (ORC) then communicate this status back to the ORC with periodic updates. The repair of this fault condition involves verifying the integrity of the wiring between the ORC and the sensor. This code will set, if the ORC and the Passenger Door Pressure Sensor do not establish and maintain valid data communications. The Diagnostic Trouble Code (DTC) will become Active after the fault has set for a minimum of 2.5 seconds. The DTC will go to Stored after the ORC to Passenger Door Pressure Sensor communication fault has been removed or the suspect pressure sensor has been replaced for 2.5 seconds. The Airbag Warning Lamp (AWL) will set in the instrument cluster.