Implausible Data Received From Right Rear OCS Sensor 1
Table of contents
U141C RAM Possible Causes
- Faulty Passenger Seat Harness
- Passenger Seat harness is open or shorted
- Passenger Seat harness circuit poor electrical connection
How do I fix code U141C RAM?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Tech Notes
- Occupant Classification System (OCS).
- Check the Passenger Seat Harness wires chafed, pierced, pinched, partially broken or Passenger Seat Harness connector terminals broken, bent pushed out, spread, corroded, contaminated.
Cost of diagnosing the U141C RAM code
The cost of diagnosing the U141C RAM code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U141C RAM Description
At ignition on the Occupant Classification Module (OCM) supplies 5 volts to power up the Right Rear Passenger Seat Weight Sensor. Every time the sensor is powered up it sends an initialization message containing the sensor serial number to the OCM. If the Right Rear Passenger Seat Weight Sensor 5 volt supply is temporarily interrupted resulting in the sensor powering up more than one time in the same ignition cycle the Diagnostic Trouble Code (DTC) will be set.