Implausible Data Received From The Gated Park Switch
Table of contents
U1454 DODGE Possible Causes
- Faulty Gated Park Switch
- Gated Park Switch harness is open or shorted
- Gated Park Switch circuit poor electrical connection
- Faulty Shifter Component
- Faulty Radio Frequency Hub (RF Hub)
How do I fix code U1454 DODGE?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U1454 DODGE code
The cost of diagnosing the U1454 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U1454 DODGE Description
When the Radio Frequency Hub (RF Hub) is awake, it sends a 12-volt reference signal on the Transmission (TRS) Park Signal circuit. When that circuit is grounded or ungrounded by the shifter, transmission module, or brake shift interlock solenoid (depending on the model) the RF-Hub broadcasts the hard wired park position message on the Controller Area Network (CAN) Bus. This Diagnostic Trouble Code (DTC) will set when the vehicle speed received over the CAN Bus indicates that the vehicle is moving but the hardware gated park input indicates that the vehicle is in park.