Implausible Driver Shift Request Signal Received On CAN And DPT CAN
Table of contents
U1467 CHRYSLER Possible Causes
- Faulty Shifter
- Faulty Electronic Shift Module (ESM)
- Electronic Shift Module (ESM) harness is open or shorted
- Electronic Shift Module (ESM) circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How do I fix code U1467 CHRYSLER?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U1467 CHRYSLER code
The cost of diagnosing the U1467 CHRYSLER code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U1467 CHRYSLER Description
The purpose of the diagnostic is to check the validity of the selected driving position. The driving position is received from two different Controller Area Network (CAN) BUS signals. If both signals are invalid because of any of the monitored CAN failures (time-out, checksum, alive counter, signal invalid) this fault is set to indicate that the driving position can not be determined. The failure is detected by the Transmission Control Module (TCM) if the CAN monitoring detects any failure on both driving position signals of the two CAN BUS signals.