Radio Controls Info Display Module Lost Communication With Radio On LIN Bus
Table of contents
U150E GMC Possible Causes
- Faulty Radio
- Radio harness is open or shorted
- Radio circuit poor electrical connection
- Faulty Radio Controls Info Display Module
How do I fix code U150E GMC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U150E GMC code
The cost of diagnosing the U150E GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U150E GMC Description
The Local Interconnect Network (LIN) Bus consists of a single wire with a transmission rate of 10.417 Kbit/s. The serial data is transmitted over a LIN circuit between a master control module and other LIN devices within a particular subsystem. If serial data communication is lost between any of the LIN devices on the LIN bus network, the master control module will set a no communication code against the non-communicating LIN device. The Diagnostic Trouble Code (DTC) will set when a supervised periodic message to Radio Controls Info Display Module from Radio has not been received.