Chassis Systems High Speed Communication Enable Circuit
Table of contents
U1653 BUICK Possible Causes
- Faulty Module that is not communicating
- Module harness is open or shorted
- Module circuit poor electrical connection
How do I fix code U1653 BUICK?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U1653 BUICK code
The cost of diagnosing the U1653 BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U1653 BUICK Description
The Body Control Module (BCM) activates the ignition circuit when the vehicle power mode is in ACCESSORY mode or Ignition ON/Vehicle In Service mode. The ignition circuit wakes up the devices for serial data bus communication. The Diagnostic Trouble Code (DTC) will set when the device setting the DTC has attempted to establish communications on the chassis high-speed GMLAN serial data circuits more than 3 times.