Lost Communication With Hybrid/EV Powertrain Control Module 2
Table of contents
U179A CADILLAC Possible Causes
- Faulty Hybrid/EV Powertrain Control Module 2
- Hybrid/EV Powertrain Control Module 2 harness is open or shorted
- Hybrid/EV Powertrain Control Module 2 circuit poor electrical connection
How do I fix code U179A CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U179A CADILLAC code
The cost of diagnosing the U179A CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U179A CADILLAC Description
The Local Interconnect Network (LIN) Bus consists of a single wire with a transmission rate of 10.417 Kbit/s. The serial data is transmitted over a LIN circuit between a master control module and other LIN devices within a particular subsystem. If serial data communication is lost between any of the LIN devices on the LIN bus network, the master control module will set a no communication code against the non-communicating LIN device. The Diagnostic Trouble Code (DTC) will set when a supervised periodic message from the Hybrid/EV Powertrain Control Module 2 has not been received.