Battery Energy Control Module Lost Communication With Hybrid/EV Powertrain Control Module 2 On High Voltage Energy Management CAN Bus
Table of contents
U185B CADILLAC Possible Causes
- Faulty Hybrid/EV Powertrain Control Module 2
- Hybrid/EV Powertrain Control Module 2 harness is open or shorted
- Hybrid/EV Powertrain Control Module 2 circuit poor electrical connection
How do I fix code U185B CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U185B CADILLAC code
The cost of diagnosing the U185B CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U185B CADILLAC Description
Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the devices. The devices have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver device as an availability indication of the transmitter device. Each message contains the identification number of the transmitter device.
This diagnostic is used to check the loss of communication with the Hybrid/EV Powertrain Control Module 2 on high voltage energy management high-speed General Motor Local Area Network (GMLAN) bus. The Battery Energy Control Module supervises a periodic serial data message to check the communication status of the Hybrid/EV Powertrain Control Module 2. If this message is not received within 1 s, this Diagnostic Trouble Code (DTC) is set.