Battery Energy Control Module Lost Communication With Engine Control Module


Table of contents

U1886 CADILLAC Possible Causes

  • Faulty Engine Control Module (ECM)
  • Engine Control Module harness is open or shorted
  • Engine Control Module circuit poor electrical connection
  • Faulty Battery Energy Control Module

How do I fix code U1886 CADILLAC?

  Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.

Cost of diagnosing the U1886 CADILLAC code

  The cost of diagnosing the U1886 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

U1886 CADILLAC Description

  Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the devices. The devices have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver device as an availability indication of the transmitter device. Each message contains the identification number of the transmitter device.
This diagnostic is used to check the loss of communication with the Engine Control Module (ECM) on a high-speed General Motor Local Area Network (GMLAN) bus. The Battery Energy Control Module supervises a periodic serial data message to check the communication status of the Engine Control Module. If this message is not received within 3 s, then this Diagnostic Trouble Code (DTC) is set.

Leave a Reply

Your email address will not be published. Required fields are marked *