Lost Communication With Active Safety Control Module 2 On Chassis Expansion CAN Bus
Table of contents
U18B7 CADILLAC Possible Causes
- Faulty Active Safety Control Module 2
- Active Safety Control Module 2 harness is open or shorted
- Active Safety Control Module 2 circuit poor electrical connection
How do I fix code U18B7 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U18B7 CADILLAC code
The cost of diagnosing the U18B7 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U18B7 CADILLAC Description
Devices connected to the serial data circuits monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the devices. The devices have prerecorded information about what messages are needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are used by the receiver device as an availability indication of the transmitter device. Each message contains the identification number of the transmitter device. The Diagnostic Trouble Code (DTC) will set a supervised periodic message that includes the transmitter device availability that has not been received.