Primary High Speed CAN Bus Subnet Configuration List
Table of contents
U18B9 CADILLAC Possible Causes
- Faulty Module that is not configured
- Module harness is open or shorted
- Module circuit poor electrical connection
How do I fix code U18B9 CADILLAC?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U18B9 CADILLAC code
The cost of diagnosing the U18B9 CADILLAC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U18B9 CADILLAC Description
The devices on the high-speed General Motor Local Area Network (GMLAN) serial data bus and the chassis high-speed GMLAN serial data bus must be programmed with software that specifically identifies the correct type and quantity of devices on the bus based on RPO configuration. If a device was not properly configured after installation, the appropriate U Code may be set for that device. No external circuit diagnosis is involved. The Diagnostic Trouble Code (DTC) will set when the device is not configured properly or the device recognizes a programming error.