Invalid Data Received From Vehicle Dynamic Sensor 2
Table of contents
U250F BUICK Possible Causes
- Faulty Vehicle Dynamic Sensor 2
- Vehicle Dynamic Sensor 2 harness is open or shorted
- Vehicle Dynamic Sensor 2 circuit poor electrical connection
How do I fix code U250F BUICK?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the U250F BUICK code
The cost of diagnosing the U250F BUICK code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
U250F BUICK Description
Some devices are constantly receiving information from other devices through serial data communication network. The invalid data code will be set when a receiving device detects a discrepancy in the information it receives from another device causing its integrity to be questioned. The symptom byte listed in the Diagnostic Trouble Code (DTC) Descriptor is for engineering reference only. No external circuit diagnosis is involved. The DTC will set if the Vehicle Dynamic Sensor 2 is not configured properly.