Driver Side Air Bag Module
Table of contents
B0001 MAZDA Possible Causes
- Faulty Clock Spring
- Clock Spring harness is open or shorted
- Clock Spring circuit poor electrical connection
- Faulty Driver Air Bag Module
- Faulty Air Bag Diagnosis Sensor
How do I fix code B0001 MAZDA?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins.
Cost of diagnosing the B0001 MAZDA code
The cost of diagnosing the B0001 MAZDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
Possible Symptoms
- Air Bag Warning Light ON
B0001 MAZDA Description
The Driver Air Bag Module is dual stage and is wired to the Air Bag Diagnosis Sensor unit through the Clock Spring. The Air Bag Diagnosis Sensor unit will monitor for opens and shorts in detected lines to the Driver Air Bag Module including the Clock Spring. The Air Bag Sensor Unit (Air Bag Control Module) monitors the Driver Air Bag Module. The Air Bag Sensor Unit sets the OBDII code when the Driver Air Bag Module is not to factory specifications.
